Cinder block and its composition
Cinder block and its characteristics
Cinder block and its advantages
Cinder block and its disadvantages
Cinder block (the name can also be found as building stone or wall stone) is a material for construction, and is mainly used for rough masonry of load-bearing walls of buildings. It is made mainly by pouring the mixture into molds, followed by vibrocompression. The most basic component for the production of cinder block is all kinds of slag. On the basis of which cinder-concrete solutions are made. The appearance of the cinder block is a rectangular block with a porous structure.
Cinder block and its composition.
The main filler in the production of cinder blocks is slag. Slag is essentially a waste mainly from metallurgical production. The slag consists of flux-containing waste rock products that have surfaced during various smelting processes. Cement is used as the base binder. In addition, the composition in the production of cinder block may include: screening of granite, expanded clay, sand, crushed stone and much more.
Cinder block and its characteristics.
The cinder block is mainly distinguished into two types, hollow and full-bodied.
Hollow bodies are divided according to the indicators of voidness: 25%, 30%, 40%, 50%.
The blocks are mainly rectangular in shape, the main size is 200mm. * 200 mm. * 400 mm.
By voidness, there are the following blocks:
 |  |  |
| Наличие пустот 28% | Наличие пустот 30% | Наличие пустот 30% |
 |  |  |
| Наличие пустот 30% | Наличие пустот 40% | Наличие пустот 0%, Полнотелый, монолитный |
Shlakoblok i yego preimushchestva. Nizkaya tsena shlakoblokov iz-za nedorogoy stoimosti komponentov ispol’zovannykh pri yego proizvodstve; Sravnitel’naya logkost’ ispol’zovaniya (mozhno oboytis’ bez professionala stroitelya/kamenshchika); Ne vysokaya stoimost’ ukladki blokov; Na stroitel’stvo sooruzheniy iz shlakovykh blokov nuzhno v dva raza men’she kladochnogo rastvora; Dostatochnaya prochnost’ i prilichnaya dolgovechnost’ materiala; Morozoustoychivost’ i zharoprochnost’. Shlakoblok i yego nedostatki. shlakobloki trebuyut dvukhstoronnego oshtukaturivaniya ili oblitsovki sten; Nizkiye pokazateli zvukoizolyatsii; Dostatochno vysokiy uroven’ teploprovodnosti; Problematichnost’ provedeniya razlichnykh kommunikatsiy v stenakh iz etogo materiala. Oblasti primeneniya Shlakobloki v osnovnom primenyayut v grazhdanskom kottedzhnom stroitel’stve, pri vozvedenii raznogo roda khozyaystvennykh/podsobnykh pomeshcheniy, bol’shikh kanalov i kamer vozdushnoy ventilyatsii v sooruzheniyakh/zdaniyakh, i takzhe v vide dekorativnykh ukrasheniy, bordyurnykh kamney i trotuarnoy plitki. Sposoby transportirovaniya Glavnoy osobennost’yu pri transportirovke stenovykh materialov, yest’ neobkhodimost’ ikh ukladki gotovykh upakovok materialov na pallety, s tsel’yu predotvrashcheniya vozmozhnosti povrezhdeniya blokov, i prepyatstviye vozmozhnosti peremeshcheniya/smeshcheniya paketa vovremya transportirovki. Zhelayem Vam uspeshnogo stroitel’stva.
Ещё
1 334 / 5 000
Результаты перевода
Cinder block and its advantages.
Low price of cinder blocks due to the inexpensive cost of the components used in its production;
Relatively easy to use (you can do without a professional builder / mason);
Low cost of laying blocks;
The construction of structures from slag blocks requires half the amount of masonry mortar;
Sufficient strength and decent durability of the material;
Frost resistance and heat resistance.
Cinder block and its disadvantages.
cinder blocks require double-sided plastering or wall cladding;
Low sound insulation performance;
Sufficiently high level of thermal conductivity;
The problematic of conducting various communications in the walls of this material.
Areas of use
Cinder blocks are mainly used in civil cottage construction, in the construction of various kinds of utility / utility rooms, large channels and air ventilation chambers in structures / buildings, and also in the form of decorative ornaments, curbstones and paving slabs.
Transportation methods
The main feature in the transportation of wall materials is the need to stack finished packages of materials on pallets in order to prevent the possibility of damage to the blocks, and to prevent the possibility of moving / shifting the package during transportation.
We wish you successful construction.