In this article, we will consider the main methods of laying paving slabs. Paving slabs are a practical facing material for arranging pedestrian, park areas and areas of roadways. On the building material market, paving slabs are present in various options, both in color schemes and in shapes, sizes, configurations, and textures.
The wide range of colors of paving slabs, which are produced by tile manufacturers, suggest a huge number of color combinations. But, as a rule, popular colors of tiles are used, from which you can get a large number of various combinations and patterns. As a result, you will get a very attractive path in the garden or a recreation area near the house.
There are a lot of options for laying tiles. The choice of the method of laying paving slabs depends on the location of the paving site, the purpose of the territory with tiles.
The main options for laying paving slabs:
Cement-sand mixture.
Cement-sand mortar.
On a sand pillow.
Before laying tiles, carefully prepare the base of the installation site. Remove the top layer of soil. To level a very uneven surface and create a pillow, the lowest layer is covered with crushed stone. Next, a layer of sand is poured and the surface is compacted.
The basic way of laying tiles involves laying tiles on wet sand. This method is very well suited for arranging garden and house paths. With this method, water does not linger on the surface of the tile and leaves through the sand. But this option is not the main one.
The most popular method is laying on a sand-cement mixture, this method is the most practical. The composition of such a mixture includes a mixture with a ratio of one part of cement and five parts of sand. The finished mixture is evenly distributed over the entire surface. After laying, the surface is filled with water, ensuring good water penetration between the seams.
A more reliable way is to lay tiles on a sand-cement mortar. To prepare the mixture, it is desirable to use a concrete mixing machine. The ratio of sand and cement is also 5 to 1. The prepared mortar is laid with a trowel. The optimal layer of the solution will be 4-5 centimeters. When laying, a rubber mallet is used. With this method, it is better to use a slope for the device to drain water, or you can use gutters to drain water.
All of the listed methods for laying paving slabs will help you decide on the best way for you. But this is only part of the matter, it is important to lay paving slabs with high quality. The entire further process of operating the finished site, track or complex of building structures depends on this. Do not forget about the design of the created territory.
For example, a variety of materials can be used to create different paving surfaces. For a garden path, a simple rectangular or square tile is suitable, with a load for pedestrian areas of the appropriate thickness. In this case, design also plays an important role. Possible alternation and combination of different colors. Figured or shaped tiles look even better, but they are usually more expensive in terms of cost and installation.
Many patterns, combinations of tile shapes, color schemes require a thorough approach to the choice and purchase of laying material. Different styles and ways of laying paving slabs give you the right to choose the design and appearance of the future object.
A variety of patterns and styling options allows you to create chaotic or geometrically clear shapes and patterns.
Good luck with your construction. We hope that our materials will help you in the choice of materials and successful construction.
Похожее
